Category Archives: Uncategorized

How to Avoid Common Appliance Repairs

Published by:

While most appliances in your home have been designed to last a lifetime, this is not always the case. Poor handling of the appliances, improper maintenance, and irregular inspection services are some of the factors contributing to constant failures and premature repairs. The importance of reading and adhering to the manual of any appliance as one way of preventing regular failures cannot be overemphasized, and so is the reliability of Appliance Repair Los Angeles Company | Onsite Appliance. That’s what any experienced technician that knows all the nitty-gritties of keeping an efficient appliance up and running will advise. Read on to get started.

  1. Clean Refrigerator Coils

A fridge is one of the complicated appliances every home or business owner should pay keen attention to. On the underside of your fridge are coils that dissipate heat. With continuous use, dust usually builds up on the refrigerator coils reducing airflow and wasting energy. Substantial dust build-up on the coils causes the compressor & condenser fan to run way longer and hotter. This leads to overheating and eventually premature failure. The high cost of replacing the condenser fan ($150) and that of a compressor ($500) is enough to make you think twice about these constant repairs. To avoid all these, always vacuum the dust build-up on the refrigerator coils after every six months to avoid expenses and the hassle to Find Appliance Repair New York City Services Near You.

  1. Keep Your Air Vents Open

Refrigerator and freezer compartments require efficient airflow to keep food at the right temperatures. Cool air enters and exits the freezer & refrigerator compartments through the air vents. Regular inspection of the air vents is important in ensuring there’s nothing blocking the air flow. If the vents are blocked, airflow into and out of the compartment will decrease. Moisture and temperature issues may therefore arise. Excessive frost and inconsistent temperatures are the other problems associated with air vent blockage. This, in turn, forces the compressor & fans to run overtime resulting in a premature compressor and fan failures. You can easily get in touch with experienced Appliance Repair Seattle – OnSite technicians for any replacements required. A fan can be replaced, however, once a compressor fails; it’s better off buying a brand-new refrigerator.

  1. Don’t Overload Your Washer or Dryer

Cramming more clothes into the washer and dryer may sound like a brilliant way of saving time, water and even cutting off the utility bills. Overloading a washer beyond a maximum load weight can break the drive coupler or fry the drive belts. It also causes smaller clothes like soaks to float over the basket where they get sucked into the pump damaging it. Replacing drive couplers will cost you around $150 while a pump repair may cost $115. Reliable Onsite Same Day Appliance Repair Near Indianapolis can come to your rescue in such situations.

Overloading a front-loading dryer/washer can damage the rear washer bearing or burn out the motor. An extra load weight will also take a longer time to dry. It’s therefore important to check and heed the weight limit in the owner’s manual to avoid expensive breakdowns or even permanently damaging your household appliance beyond repair in some situations, although you may want to contact expert technicians for Residential Appliance Repair In Jacksonville before investing in a new appliance.

  1. Clean Refrigerator Gaskets

A refrigerator door gasket should be sealed properly for proper cooling. A poor seal may lead to high energy bills due to poor regulation of the fridge’s internal temperatures. That’s what experts at Denver Appliance Repair Company – OnSite advises homeowners. Thorough cleaning of the gasket is one way of avoiding a poor seal in your refrigerator. It’s highly recommended to clean your refrigerator gasket quarterly or more frequently if you notice mold growth or spills. Sticky food spills on the gasket damage its integrity by causing it to glue to the frame. Pulling the door harder on stuck frame causes tear. It’s advisable to clean the gasket with warm water and a sponge. Using certain detergents may damage the gasket.

  1. Don’t Get Physical with Your Door

Slamming your washer or dryer doors can break switches and pose a serious threat to the door lock which might get broken. Closing your washer’s door gently as per the instructions is one of the convenient tips you should consider for optimal services. Proper handling of the door will spare you costs associated with more frequent Major Appliance Repair Charlotte NC services & a lot of hassle. A broken lid switch can cost you up to $175. You can avoid all these expenses by gently closing the door on a regular basis until it’s more of a routine.

  1. Clean the Lint Filter

A clogged lint filter causes slow drying of the clothes and the machine will have to work harder hence wasting energy. Excess lint bypasses the filter and collects in the dryer’s vent line, reducing airflow even further. Increased deposition of the lint on the vent line causes a complete blockage which in turn makes the dryer to overheat and the thermal fuse to blow. Once the fuse blows, the dryer will start up, however, it won’t heat. Replacing a thermal fuse will cost you up to $200 which you could have saved by simply cleaning the lint filter after every load. To get it done affordably means you must find the best Appliance Repair Phoenix Service Technicians.

  1. Don’t Spray Switches

Spray cleaners can be perfect for cleaning other surfaces in your home but not the stove, touch-control panels or dishwasher knobs. The compositions of these liquids can easily short the switches and even the electrical components behind the control panel. Repairing a shorted stove igniter switch, for example, can cost you $125 while replacing a shorted control panel may lead to parting with $300. If you must use this liquid cleaner, spray just a little onto a sponge and gently clean the knobs & touch control panel. This way, the spray won’t penetrate the delicate parts. Most homeowners in such circumstances seek solutions from OnSite – In Home Appliance Repair Columbus experts.

  1. Do Not Drag Clothes Out Of Your Washer

While it can be cumbersome to lift a heavy bundle of clothes in & out of a front-loading washer; it’s the best you can do to avoid tearing up the rubber door gasket. Dragging a heavy bundle over the door ledge is one of the costly mistakes you probably won’t like paying for through Appliance repair in Charleston SC. Replacing the gasket and zipper requires a lot of dis-assemblies and this will surely cost more than $200. There’s no need for expensive gasket replacement when you can conveniently lift the clothes in and out of the washer.

  1. Clean the Dishwasher Screen

It’s highly recommended to clean the filtering screen beneath the spray arm on a regular basis if you want more savings for your In Home Appliance Repair Shop Philadelphia. This is necessary to prevent stuck food particles from degrading into the slime that blocks water & reduces the washer’s cleaning performance. Cleaning of the filter can be an easy job but will cost you about $100 to get it done. To boost efficiency, a teaspoon of soap detergents is enough to clean most loads since excess soaps build up in the dishwasher and eventually reduces water flow. To get rid of excess soap buildup, products such as Dishwasher Magic can be quite useful.

  1. Change the Furnace Filter

A clogged filter overworks the furnace to an extent of shutting it down. A clogged filter restricts airflow causing the temperatures of areas near the heat exchangers to rise beyond the safe temperature threshold and the burners shut down. In most cases, the furnace will cool down and fire up once again. That said, this might not always be the case; if the shutdown or overheating cycle repeats enough times, the furnace control may shut down for good. Resolving the whole mess with the help of a reputable Appliance repair Middletown service may cost as high as $300. The best way to overcome this challenge is by installing an air filter gauge kit instead of guessing when to replace the filter. One of the reputable air filter gauges is the General G-99 kit that’s available on Amazon.

Taking good care your home appliances will definitely save you a lot of money and extent their life spans. You can always attempt to do most of the repairs on your household equipment as long as you are armed with the right information and tools. If however you cannot manage to properly fix an appliance because the problem is beyond your technical skills, it’s always to the best your interest to call the experts. Regardless of the location of your home, nowadays you can easily find a reliable appliance repair service to effectively solve most of the problems you might be experiencing. Finding the right service near your location will definitely be of great convenience to ensure the smooth running of your home activities and functions.

Miami Appliance Repair: When To Repair And When Not To Bother

Published by:

When a household appliance stops working, the first question that comes to people’s mind is whether to get it repaired or replace it. The answer to this question is not easy, as there are several factors you must consider before taking a decision. Some important factors you should consider include the age of the appliance, how often the appliance is used, is it a well-known brand, and the price of the new appliance you will be buying in South Florida.

south florida

To make a better home with functional appliances, if you have used the residential appliance for more than ten years it is best to replace the appliance. Most appliances including washing machines, air conditioners, fridges, dishwashers, dryers, and microwaves are designed to last for 7 to 10 years. If you use the appliance heavily, then it could for up to 7 years. Some people would argue that they have bought an expensive brand that was supposed to last for at least 25 years. You may be right, but do consider the following factors before you take a decision.

  • The spare parts of expensive brands are usually very expensive, and fewer appliance technicians can fix it. For instance, if your expensive washing machine needs repair, you may have to pay a high price to the washing machine repairman because there are only a few technicians who know how to repair the machine.
  • Replacing the parts of a machine that is over ten years old is a beginning of a long and painful journey. Let’s say your microwave repair calls for a new thermostat. Once you install the thermostat, the parts surrounding the thermostat are also more than ten years old, which increases their chances of getting damaged. In such situations, it is best to replace the machine.

Rules for Repairing an Appliance

When it comes to repairs, the basic rule is never waste your hard-earned money.

  1. Before hiring a technician, make sure you check the cost of the new appliance. At times, manufacturers may sell quit or refurbished stock at unbelievable prices.home kitchen
  2. When the home appliance is more than ten years old, don’t bother repairing the device unless it is expensive. When getting a quote from an appliance repair company, find out the possibility of a problem in other parts. Once you spend a few hundred dollars on repairing an appliance, it’s hard to spend again when the appliance breaks down.
  3. If you are using an appliance for less than 5 years, it is best to repair the appliance. That being said, make sure you check the cost of replacing the parts. At times, the parts are so expensive, that you buy a new appliance for the amount you spend on replacing the parts.
  4. When the oven or any other appliance stops working, make sure you check the price of the new oven before you ask for appliance repair Miami Same Day Service – The Appliance Experts. If the oven technician charges you more than half the price of the new oven, it is best to buy a new machine. It is because the new machine comes with a 12-month warranty, which is usually not offered by the technician.
  5. If you have recently purchased a high priced appliance for your new house in Miami, make sure you use the services of an expert. It will help in reducing your expenses. For instance, if your dryer is not starting, make sure you hire an experienced and reliance dryer service technician. It is because, the machine may not work because the switch is broken, which is a small problem. If you hire a local technician, they may charge you for the items that need not be replaced.

Dishwasher Guide: Tips For Appliance Repair In West Palm Beach

Published by:

Living in West Palm Beach, FL and is having a problem with your dishwasher, but your friendly dishwasher service technician is unable to pick up your call, just read this article before you make that second call. There are some simple checks that you can do in your house without getting help from a dishwasher technician. You can refer to the owner’s manual you have in your home or check out these tips for Appliance Repair in West Palm Beach for ideas of what you must do to address the problem.

Florida, US

Dishes are Dirty

Some people complain that the dishwasher remains dirty or has spots after washing. One of the potential causes of this problem may be overloading. When you put too many dishes in your household appliance, the detergent and water may not be able to clean properly. You can check the owner’s manual for the recommended capacity and loading instruction.

The problem in the spray arm can also cause this problem. If small items or utensils fall inside the dishwasher, they can block the spray arm. If the spray arm is unable to move, it will not effectively spray water throughout the appliance. At times, debris may block the small holes of the arm. To remove the debris, you will have to unscrew the spray arm. Remove the debris from the arm and put it back in place.

At times, using the wrong detergent can cause this problem. If you are unsure of the detergent, you should use, just call the manufacturer on their toll-free number. Most manufacturers in Florida will have a list of detergents that will give you the best results.

If the temperature of the water you use the dishwasher is not high enough, it will reduce the drying time which increases the chances of spots. You must check the owner’s manual for recommended temperature and repair.

Water Leaksappliance technician repairing the dishwasher

If you notice a large pool of water on the floor or leaks after or during machine operation, it could be due to a bad seal or gasket. The gasket is made of vinyl or soft rubber, which can become less flexible and dirty. Check for visual signs of damage and replace it if necessary. If there are no signs of damage, then clean it using an all-purpose cleaner.

The float and the float switch are two parts that prevent the appliance from overflowing. The float switch is located in front of the tub. If you have difficulty finding the switch, you can get help from the owner’s manual. When the float switch becomes dirty, it can get stuck to the tub, causing a leak. You can clean the dirty float switch using sponge and toothbrush.

Wrong detergents will not damage the dishes, but can also cause water leaks. If you don’t use the recommended detergent, too much foam can also spill out of the appliance.

If these simple checks don’t fix the problem in the dishwasher, it is best to call a dishwasher repairman, who offers to repair the machine in both residential and commercial areas.

Always remember, performing routine service and maintenance reduces the need for dishwasher repair in general. Regularly removing the waste and debris, cleaning the seal, and using the right detergent will solve most of your problem. Doing so will save both time and money in the long run.